Devon · South West
Boiler Disposal in Exmouth
If your installer left the old boiler behind in Exmouth, we will collect it and provide a waste transfer note.
Our Exmouth coverage
We cover all of Exmouth and the wider Devon area. Postcodes we cover here include EX8. The same team covers Budleigh Salterton, Lympstone, Starcross, Dawlish Warren and East Budleigh too.
Local considerations in Exmouth
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Post-2000 properties in Exmouth often have unvented cylinders, which we collect once drained and capped by your engineer. Seafront properties in Exmouth with external oil tanks can see faster corrosion, and we handle tank removal safely.
Spare radiators replaced during a Exmouth extension can be collected along with the old boiler. We can collect from your Exmouth driveway on the same day your heating engineer finishes the new installation.
Boiler Disposal jobs we handle in Exmouth
Radiator and Pipework Disposal
Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.
Hot Water Cylinder and Tank Removal
Drained copper cylinders removed from airing cupboards and cold water storage tanks taken out of lofts, including awkward loft hatch access.
Back Boiler Removal
Removal of old back boilers and their gas fires from fireplaces after decommissioning, including the heavy cast-iron boiler unit and fire front.
Old Boiler Collection
Collection of wall-hung combi, system and regular boilers that have already been disconnected, from homes, building sites and installers' yards.
Installer and Trade Collections
Regular or one-off collections of old boilers, cylinders and scrap from heating engineers, plumbers and builders, from sites or yards.
Oil Boiler and Oil Tank Removal
Removal of oil-fired boilers and empty plastic or steel heating oil tanks from rural and off-grid properties, with residual oil handled by licensed specialists.
How much it costs in Exmouth
- Empty heating oil tank removal: £200–£450. Depends on size, material and access; residual oil must be pumped out first.
- Old radiators: from £10 each. Steel panel radiators bunged and carried out; cast-iron radiators priced separately.
- Cylinder and loft tanks: £90–£180. Drained copper cylinder plus cold water and expansion tanks, including loft access.
Prices are a guide. Your quote for Exmouth is a fixed price based on the details you give us. Full price guide.
Boiler Disposal questions from Exmouth
Do you remove back boilers in Exmouth?
Yes. Once a Gas Safe engineer has disconnected it and the system is drained, we remove back boilers and gas fires from Exmouth homes and clear the fireplace opening.
Can you remove loft tanks in Exmouth?
Yes, once they are drained and capped. We remove cold water and expansion tanks from lofts in Exmouth, cutting plastic or steel tanks where needed. Possible asbestos cement tanks are tested first.
Will you collect my old boiler from my garage in Exmouth?
Yes. If your engineer has left the old boiler in your Exmouth garage, drive or spare room, we can collect it, along with any cylinder, tanks or radiators that need clearing.
How much does boiler disposal cost in Exmouth?
Collecting a disconnected wall-hung boiler in Exmouth typically costs from about £40. Back boilers, loft tanks, cast-iron radiators and oil tanks cost more. Send the details and we will give you one fixed price.
How do you get an old water tank out of the loft?
Plastic tanks can usually be flexed, folded or cut to fit through the loft hatch. Galvanised steel tanks may need cutting into sections, because some were placed in the loft before the roof was finished. Older tanks that may be asbestos cement must not be cut until tested. We bring boards and dust sheets to protect ceilings and landings.
How do I dispose of an old boiler?
Most people ask their heating engineer to take it, book a registered waste carrier, or take it to a household recycling centre that accepts scrap metal. The boiler must be disconnected by a Gas Safe registered engineer or OFTEC technician first. A collection service is useful if the installer has left the boiler behind or there are also tanks and radiators to clear.
Helpful guides
Switching From a Gas Boiler to a Heat Pump: Removing the Old System
When you switch from a gas boiler to a heat pump, the old boiler is disconnected by a Gas Safe registered engineer and removed. A combi…
Read the guide →Hot Water Cylinder and Loft Tank Removal: A Practical Guide
Hot water cylinder and loft tank removal usually follows a switch to a combi boiler. A plumber drains and disconnects the cylinder and…
Read the guide →Get a free boiler disposal quote in Exmouth
Tell us what you need and we'll come back with a clear price.
Request a quote