Boiler Disposal
Oil Boiler and Oil Tank Removal
Removal of oil-fired boilers and empty plastic or steel heating oil tanks from rural and off-grid properties, with residual oil handled by licensed specialists.

What's involved
Oil boilers are often larger than gas units and may sit in a utility room, outbuilding or external casing. An OFTEC-registered technician must isolate the oil supply and disconnect the boiler before removal. Heating oil tanks are a bigger job. Even an empty tank holds sludge and residual oil in the base, which is hazardous waste and must be pumped out by a licensed oil waste contractor before the tank can be moved. Plastic bunded tanks can then be cut into sections or lifted whole onto a vehicle, while steel tanks are cut on site. Tank bases and supply lines are left for your installer or builder unless agreed. Tell us the tank size in litres and whether it still contains oil. Removal of an oil boiler takes around an hour, and an empty tank one to three hours depending on size and access. Paperwork is provided for both general and hazardous waste.
How we handle it
Describe the items
Use the quote form to list what needs collecting: boiler type, cylinder, tanks, radiators or oil tank. Tell us where each item is, whether it has been disconnected and drained, and add photos if possible.
Get your fixed price
We confirm one all-in price based on the items, weight and access. If anything may contain asbestos or residual oil, we explain what extra steps are needed before collection.
Disconnection by an engineer
A Gas Safe registered engineer or OFTEC technician disconnects and makes safe the boiler, and the system is drained. Leave items somewhere dry and accessible if they have already been removed.
Collection
Our team protects floors and walls, bungs radiator valves to prevent sludge leaks, and carries items out. Loft tanks and back boilers take longer and are planned in advance.
Recycling and paperwork
Metals are taken to a recycler and any hazardous waste goes to a licensed facility. You receive a waste transfer note confirming the items were handled by a registered waste carrier.
Price guide
Boiler disposal is priced on the number and type of items, their weight and how hard they are to reach. A single disconnected wall-hung boiler in a garage is a quick, low-cost job. Back boilers, loft tanks, cast-iron radiators and oil tanks take longer. Metal scrap value is reflected in our prices where it applies.
- Empty heating oil tank removal: £200–£450. Depends on size, material and access; residual oil must be pumped out first.
- Old radiators: from £10 each. Steel panel radiators bunged and carried out; cast-iron radiators priced separately.
- Cylinder and loft tanks: £90–£180. Drained copper cylinder plus cold water and expansion tanks, including loft access.
Questions about oil boiler and oil tank removal
How do I dispose of an old boiler?
Most people ask their heating engineer to take it, book a registered waste carrier, or take it to a household recycling centre that accepts scrap metal. The boiler must be disconnected by a Gas Safe registered engineer or OFTEC technician first. A collection service is useful if the installer has left the boiler behind or there are also tanks and radiators to clear.
Does the boiler installer take the old boiler away?
Many installers include removal of the old boiler in their quote, but not all do, and some leave cylinders, loft tanks and radiators behind. Check your quote before work starts. If items are left, a separate collection is usually cheaper than paying for a skip, and you get a waste transfer note.
How much does boiler disposal cost?
Collecting a disconnected wall-hung boiler typically costs from around £40. Heavier floor-standing boilers cost more, and a back boiler removal is usually £120–£220. Clearing a cylinder and loft tanks typically costs £90–£180. The final price depends on the number of items, their weight and how easy they are to reach.
Other services
Old Boiler Collection
Collection of wall-hung combi, system and regular boilers that have already been disconnected, from homes, building sites and installers' yards.
Back Boiler Removal
Removal of old back boilers and their gas fires from fireplaces after decommissioning, including the heavy cast-iron boiler unit and fire front.
Hot Water Cylinder and Tank Removal
Drained copper cylinders removed from airing cupboards and cold water storage tanks taken out of lofts, including awkward loft hatch access.
Radiator and Pipework Disposal
Collection of old steel and cast-iron radiators, towel rails and offcut copper pipe from refurbishments, with careful handling to avoid sludge spills.
Installer and Trade Collections
Regular or one-off collections of old boilers, cylinders and scrap from heating engineers, plumbers and builders, from sites or yards.
Oil Boiler and Oil Tank Removal near you
Get a free boiler disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote